Midmark Sterilizer Error Codes
One important thing: Midmark uses different error-code systems depending on the sterilizer model and generation. The older M9/M11 units use three-digit codes beginning with C, while newer M9/M11 models (such as the -050 series) use a newer alphanumeric system.
I recommend organizing your website by model family so customers don't confuse one model's error codes with another's.
1. Midmark M9, M9D, M11 and M11D – Older models
These models generally use codes beginning with C.
|
Error code |
Description |
|---|---|
|
C010 |
System power loss |
|
C060 |
System hardware error |
|
C099 |
Factory-generated code (normally harmless) |
|
C100–C107 |
Stop button error |
|
C230–C232 |
Water level sensor / low water |
|
C320–C326 |
Door switch / door closed error |
|
C380–C385 |
Door switch / door open error |
|
C533–C537 |
Steam temperature low |
|
C540–C547 |
Steam temperature high |
|
C560–C567 |
Steam temperature sensor hardware error |
|
C570–C577 |
Steam temperature over-limit |
|
C630–C637 |
Pressure low |
|
C640–C647 |
Pressure high |
|
C660–C667 |
Pressure sensor hardware error |
|
C670–C677 |
Pressure over-limit |
|
C980–C987 |
High-limit thermostat open |
These are code families and ranges documented in Midmark's technical references. The exact final digit helps identify when the fault occurred during the cycle.
2. What the older error codes generally mean
Here is a customer-friendly explanation you can put underneath the code chart.
|
Problem |
Common areas requiring inspection |
|---|---|
|
Power loss |
Electrical supply, power cord, connections |
|
Water level error |
Reservoir, water sensor, fill valve, chamber filter |
|
Door error |
Door latch, door motor, springs, door switch |
|
Low temperature |
Heating element, temperature probe, leaks |
|
High temperature |
Temperature sensor, control system |
|
Temperature hardware |
Sensor wiring, sensor connections, control board |
|
Low pressure |
Chamber leaks, heating system, pressure sensor |
|
High pressure |
Venting system, valves, pressure sensor |
|
Pressure hardware |
Pressure sensor, wiring, control board |
|
High-limit error |
High-limit thermostat, water sensor, wiring |
3. Newer Midmark M9/M11 (-050 series)
The newer models use a different error-code system. Here are examples documented in Midmark's technical library.
|
Error code |
Description |
|---|---|
|
0741-0A[m]8 |
Power loss during operation |
|
0741-070C |
Startup error |
|
0743-0328 |
Low chamber water |
|
0746-033C |
Low chamber temperature |
|
0747-033C |
Low chamber pressure |
|
0749-1568 |
Door sensor error |
|
0906-1B00 |
Control board communication error |
|
094A-1080 |
Software update error |
|
0954-0A[m]8 |
Display power loss |
|
094E-0E10 |
USB export / insufficient memory |
|
095E-4340 |
Ideal pressure error |
|
095F-16[M]C |
Failed to start cycle |
|
0904-13[M]9 |
Memory almost full |
|
0904-0E[M]9 |
Memory write error |
The [m] and [M] notations are variable code characters in Midmark's documentation, not literal characters to enter as error codes. This is an example list, not the complete newer-model diagnostic library.